Microvisioneer manualWSITurn your microscope into a manual whole slide scanner!
Microvisioneer manualWSI is an affordable high quality manual whole slide scanning software that allows upgrading existing microscopes to manual whole slide scanners. The extremely versatile and innovative solution allows users to create virtual slide images for a variety of applications. This easy-to-use solution enables seamless stitching of high quality images, similar to automated systems and scanners. This system is compatible with PROMICAM, OLYMPUS® DP and Zeiss® Axiocam cameras and can be used for digitizing almost any type of specimen.
Features:

- Fast and smooth scanning of whole slides
- Scanning by moving the manual stage – no need for a motorized stage
- Wide range of suitable applications
- Option of continuous focus adjustment and overwriting of out-of-focus areas
- Option to scan multiple disjointed areas of the sample
- Overview of the scanned part of the sample
- Compatibility with standard optical microscopes from various manufacturers
- Compatibility with PROMICAM, OLYMPUS® DP and Zeiss® Axiocam cameras
- Viewing scanned images, annotation, measurements, image cropping, creating lower resolution overview images for presentations and publications
- Option to share images for consultation purposes on a local LAN or over the Internet without sending or uploading them to a server using the optional InstaSlide module
- Remote viewing of shared images on any type of device in a web browser without the need to install special viewing software
- Easy and intuitive user interface
- Saving images to SVS files, which are compatible with a wide range of browsers and image analysis programs, or to TIFF files
Suitable for Applications:
Sample Images:
Clicking on the links below will open a new browser window in which you can view images acquired by manualWSI software and shared by the InstaSlide software module.
Supported Cameras
- PROMICAM PRO 3-3CP, PROMICAM PRO 3-5CP, PROMICAM 3-3CP (discontinued), PROMICAM 3-5CP (discontinued)
- OLYMPUS® DP22, DP27, DP28, DP72, DP73, DP74, DP80
- Zeiss® Axiocam 305, 503, 506, 512, 702, 705, 712, MR Rev. 3
System Requirements
Minimum System Requirements | Recommended Computer Configuration | |
---|---|---|
Processor | Intel® Core™ i3 / AMD RYZEN™ 3 | Intel® Core™ i5 / AMD RYZEN™ 5 or better |
Operating Memory | 4 GB | 16 GB |
Operating Semory | Microsoft® Windows® 7/10/11 (64bit) | Microsoft® Windows® 10/11 (64bit) |
Monitor Resolution | 1600 x 900 pixels | 1920 x 1080 pixels or higher |
Disk Drive | 500 GB hard drive | 512 GB SSD |
Minimum System Requirements | |
Processor | Intel® Core™ i3 / AMD RYZEN™ 3 |
Operating Memory | 4 GB |
Operating System | Microsoft® Windows® 7/10/11 (64bit) |
Monitor Resolution | 1600 x 900 pixels |
Disk Drive | 500 GB hard drive |
Recommended Computer Configuration | |
Processor | Intel® Core™ i5 / AMD RYZEN™ 5 or better |
Operating Memory | 16 GB |
Operating System | Microsoft® Windows® 10/11 (64bit) |
Monitor Resolution | 1920 x 1080 pixels or higher |
Disk Drive | 512 GB SSD |
Related Products
Microsoft®, Windows® are registered trademarks of Microsoft Corp.
Intel®, Intel Core® are registered trademarks of Intel Corporation